The ruggedised DM5E Thickness Gauge is ergonomically designed for use with one hand and is just 223g including batteries with up to 60 hours of operation. Certified to EN 15317 it has a backlit LCD data display so visible in all lighting conditions. It has a sealed, watertight and dust-proof membrane keypad which features function and arrow keys to navigate a simple and intuitive menu with a wide range of features, including Min/Max capture, B-Scan generation, alarms, and differential thickness measurement to allow instant comparison between measured and nominal thickness. Manufactured by: Waygate Technologies Model: DM5E Corrosion Thickness Gauge
Services offered for this product
- Sales
- Rental
- Installation
- Calibration
- Maintenance
Applications
- Wall thickness measurements on:
- Pipelines
- Pressure vessels
- Storage tanks
DM5E Family |
Operating Principle |
Ultrasonic, pulse echo measurement method |
Measuring Range |
Depends on probe and material, 0.60 mm to 508 mm (0.025" to 20.00") in IP to 1st BW measurement mode, 2.00 mm to 127.0 mm (0.079" to 5.00") in dual-multi measurement mode, the coating thickness range shall be 0.3 mm to 2.50 mm (0" to 0.098"). |
Measuring Resolution |
0.01 mm default - selectable 0.01, 0.1 mm (0.001" default - selectable 0.001", 0.01") |
Material Velocity Range |
0.508 to 18.699 mm/msec (0.0200" to 0.7362"/msec) |
Material Velocity Resolution |
1 m/s (0.0001"/msec) |
Units |
Inch or millimeter |
Calibration |
One-point cal, on-block and off-block, two-point cal |
Pulser |
Excitation Pulse |
Spike pulser |
Voltage |
120 V into 50 ohm load, using 20 MHz oscilloscope |
Receiver |
Bandwidth |
500 KHz to 12 MHz @ -3 dB |
Gain |
Automatic gain control |
Display Type |
High-resolution graphical LCD, 64 x 128 pixels, 53.0 mm x 27.0 mm with backlight and adjustable contrast |
Update Rate |
4 Hz or 8 Hz, user selectable, 24 Hz scan mode capture rate |
Thickness value display |
NORMAL view mode |
5 Digit, 10.6 mm (0.4") high |
B-SCAN view mode |
5 Digit, 2.55 mm (0.1") high |
Display of Last Reading |
Solid filled or hollow digits indicate coupled or uncoupled condition |
Setups |
9 standard setups for probes |
Alarm Settings |
Minimum and maximum alarms, range of 0.25 mm to 508 mm, 0. (0.010" to 20.00") reading alternates between solid and hollow when alarms are enabled and violated |
Power Requirements |
2 AA size batteries |
Battery Life/ Operating Time |
Approximately 60 hours |
Instruments Shut-off |
Selectable ALWAYS ON or AUTO OFF after 5, 10, 15, 30 minutes of inactivity |
Language |
Selectable English, German, French, Spanish, Italian, Russian, Japanese and Chinese |
I/O Connectors |
Transducer |
Dual Lemo 00 (coax) |
Mini-USB |
Mini USB to PC |
Temperature |
Operating |
-10°C to +50°C (+10°F to +120°F) |
Storage |
-20°C to +60°C (-10°F to +140°F) |
Weight |
223 g (0.597 lb) including batteries |
Size |
138 mm x 32 mm x 75 mm |
Shock |
IEC 68-2-27 Ea, as per Mil Std 810C Method 516.2 Procedure I with a 15g 11ms impulse half sinusoidal wave applied 6 times per axis |
Sealing |
IEC529 / IP54, dust proof/dripping water proof as per IEC 529 specifications for IP54 classification |
PT900 Portable Ultrasonic Flow MeterThe PT900 is the latest generation of portable clamp on flow meters from Panametrics. View product page Panametrics PT878GCPanametrics PT878GC Clamp on gas flow meter suitable for most gases including natural gas, compressed air, nitrogen, steam, argon, helium and methane. View product page AT600 Clamp On Liquid Flow Meter The AquaTrans AT600 clamp-on ultrasonic transmitter provides flow measurement in a low-cost package which can be installed at the measurement point. View product page Panametrics AT868 Clamp On Flowmeter The AT868 clamp on ultrasonic flow meter combines state of the art ultrasonic flow measurement capability with a low-cost transmitter package that can be installed right at the process measurement point. It's designed specifically for water and wastewater applications in full pipes. View product page Panametrics DF868 Liquid Flowmeter The DF868 MCERTS-registered clamp on flow meter uses the Transit-Time for measuring most liquids. Single Channel or Dual Channel. Suitable for hazardous areas. IN STOCK. View product page CTF878 Clamp On Gas MeterThe CTF878 clamp-on gas flowmeter is the only flow meter in the world that can measure gas in metal pipe work at near atmospheric pressure using a technology called correlation tag (patented) The Panametrics DigitalFlow CTF878 clamp on gas flow meter can measure a wide range of velocities in small to large pipes up to 150 ft/s (46 m/s), lending itself to a wide range of applications... View product page
|
|