Flow Meters for ALL Applications
Select your flow meter from our stock
Flow meters tend to be specially designed for the best performance under different situations, which can sometimes be confusing. Start on this page after determining if your requirement is liquid flow in pipes, gas flwo in pipes or open channel flow. Clicking on the appropriate link will take you to another page where you will be able to select the flow meter you need in greater detail.
If you need assistance at any point in the process, just call 01527 882060 and one of our technical staff will be glad to help.
You can also fill out the short form on the lower left of any page and get a call back from one of our staff.
Flow meters for all situations
RS Hydro offer an extensive range of flow meters covering all applications and in all industries. We supply and install contact and non-contact flow meters depending on application, pipe size and flow conditions.
We are internationally recognised as specialists in measuring difficult applications for any liquid, at any temperature, in any location worldwide. This includes any liquid, steam, compressed air, gas or water in closed pipes and water and effluent in open channels, rivers and part-full pipes. We provide a worldwide service for supply and installation of flow meters and flow measurement equipment whether it's onshore or offshore.
Pipe - Liquids
Non-invasive, ultrasonic flow meters offer great benefits in many applications. By using ultrasonic transducers clamped to the outside of pipework, there is no disruption of flow or service downtime. Ultrasonic flowmeters use transit time technology.
Browse Pipe Flowmeters >>Pipe - Gas
Non-invasive, ultrasonic flow meters offer great benefits in many applications. By using ultrasonic transducers clamped to the outside of pipework, there is no disruption of flow or service downtime. Ultrasonic flowmeters use transit time technology.
Browse Gas Flowmeters >>Open Channel Flowmeters
Non-invasive, ultrasonic flow meters offer great benefits in many applications. By using ultrasonic transducers clamped to the outside of pipework, there is no disruption of flow or service downtime. Ultrasonic flowmeters use transit time technology.
Browse Open Channel Flowmeters >>Flow meters for any situation
The recent emphasis on environmental monitoring and increased automation in many industries has resulted in a need for many more types of monitoring instruments, among them flow meters.
Flow meters generally fall into three different categories;
For flows inside pipes (either gases or liquids) flow meters are generally classified as either wetted (in contact with the flowing sustance) or dry (not in contact with the flowing liquid). They can then be further classified as portable or fixed flow meters.
For our viewers conveneience we have organised our website to conform to the above.
SITRANS 3100 Magnetic Flow Meter
The SITRANS 3100 magnetic flowmeter from Siemens comes with a large variety of liners and electrode material. The magflo is also supplied with grounding electrodes as standard.
CTF878 Clamp On Gas Meter
The CTF878 clamp-on gas flowmeter is the only flow meter in the world that can measure gas in metal pipe work at near atmospheric pressure using a technology called correlation tag (patented) The Panametrics DigitalFlow CTF878 clamp on gas flow meter can measure a wide range of velocities in small to large pipes up to 150 ft/s (46 m/s), lending itself to a wide range of applications...
XGS868i Steam Flowmeter
The XMT868i transmitter is a Transit Time and cross correlation signal processor, making it perfect for measuring flow in a range of applications, from pure liquids to even difficult gas-solid-liquid mixtures, which previously could only be handled by Doppler meters.
XGM868i Gas Flowmeter
The XGM868i from Panametrics is a gas flow meter designed to measure the flow rate of almost any gas.
GS868 Steam Flow Meter
The GS868 flow meter from Panametrics is specifically designed for mass flow measurement of steam.
GM868 Ultrasonic Gas Flow Meter
The Panametrics GM868 is a multi purpose gas flow meter. The GM868 is suitable for measuring the flow of most gases including fuel gases, waste gases, stack gases and others. It is a complete ultrasonic flow metering system.
Panametrics GC868 Gas Flow Meter
The DigitalFlow™ GC868 flow meter can be used to measure the flow of any gas or steam.
Panametrics PT878GC
Panametrics PT878GC Clamp on gas flow meter suitable for most gases including natural gas, compressed air, nitrogen, steam, argon, helium and methane.
GF868 Flare Gas Flowmeter
The DigitalFlow GF868 flare gas flowmeter from Panametrics is a complete ultrasonic flow metering system for measurement of flare gas.
SITRANS F C MC2 Coriolis Mass Flow Meter (Discontinued)
The SITRANS F C MC2 coriolis mass flow meter available as a standard version (DN 50 to DN 150 (2" to 6")) and a hygienic, EHEDG-certified version (DN 20 to DN 80 (¾" to 3")). MC2 and MC2 hygienic are both suitable for accurate mass flow measurement of a variety of liquids and gases.
