The DuraTracker and DuraTracker Ex flowmeters are the most efficient and reliable flow monitoring solution for a wide range of open channel flow measurement applications. They support flow measurement technologies including ultrasonic, non-contact laser area velocity and submerged Doppler area velocity. The DuraTracker package cost-effectively integrates cellular communications and multiple flow technologies within a single module. The standard Bluetooth capabilities make the programming, sensor calibration, and data retrieval job easy through wireless devices. A field upgradable remote cell phone communication option is also available.
Flow is calculated by the DuraTracker, using standard open channel level-to-flow and area velocity conversions, user defined equations, level to area data points, or level to flow data points.
The DuraTracker Ex flowmeter is specifically designed for use in hazardous (Ex) areas classified as Class I, Div 1. Zone 0, ATEX Category 1G. It provides ideal flow monitoring and remote communication solutions for wastewater systems.
Manufactured by: Teledyne ISCO
Model: DuraTracker Flowmeter / DuraTracker EX Flowmeter
*DuraTracker*
Collection system flow monitoring
Surface water flow monitoring
Industrial pretreatment flow monitoring
WWTP flow monitoring
*DuraTracker Ex*
Collection system flow measurement
Industrial pretreatment flow measurement
Waste Water Treatment Plant flow measurement
DuraTracker Flowmeter Specifications | |
Size (H x W x D): DuraTracker: | 12.25 x 6.25 x 12.75 in (31.12 x 15.88 x 32.39 cm) |
DuraTracker w/o Battery Box | 13.375 x 8.625 x 4.5 in (33.97 x 21.91 x 11.43 cm) |
Weight DuraTracker | 14.3 lbs. (6.49 kg) without batteries |
DuraTracker w/o Battery Box | 5.3 lbs. (2.4 kg) |
Materials | ABS, Delrin, Stainless Steel |
Enclosure | IP68 |
Temperature Range | Operating: -40 to 140 °F (-40 to 60 °C) Storage: -40 to 140 °F (-40 to 60 °C) |
Power Source (each bank) | 2 x Alkaline Lantern Batteries 8 x Alkaline D Cell Batteries 4 x Lithium Thionyl Chloride (Low Temperature Applications) |
Battery Life: (1 battery bank) |
310 Ex Ultrasonic Sensor: 18 months a 350 Ex AV Sensor: 8 months a 360 Ex LaserFlow Sensor: 9 months a |
Power Required | DuraTracker: 9-15 Vdc External Power: 7-28 Vdc |
DuraTracker EX Flowmeter Specifications | |
Size (HxWxD) | 12.25 x 6.25 x 12.75 in (31.12 x 15.88 x 32.39 cm) |
Weight | 16.1 lbs. (7.3 kg) without batteries |
Materials | ABS, Delrin, Stainless Steel |
Enclosure | IP68 |
Temperature Range | Operating: -4 to 140 °F (-20 to 60 °C) Storage: -40 to 140 °F (-40 to 60 °C) |
Power Source (each bank) | 8 x Alkaline D Cell Batteries |
Power Source (each bank) | 8 x Alkaline D Cell Batteries |
Battery Life (1 battery bank) | 310 Ex Ultrasonic Sensor: 12.5 months a 350 Ex AV Sensor: 5 months a 360 Ex LaserFlow Sensor: 6 months a |
Power Required | 9.5–13.2 Vdc |
Certifications without Modem | Class I, Division 1, Groups C-D, T4 Class I, Zone 0, AEx ia [ia] IIB T4 Ga II 1 [1] G Ex ia [ia] IIB T4 Ga -20°C < Tamb < +60°C Ex ia [ia] IIB T4 Ga -20°C < Tamb < +60°C |
Certifications with Modem | Class I, Division 1, Groups C-D, T4 Class I, Zone 0, AEx ia ma [ia] IIB T4 Ga II 1 [1] G Ex ia ma [ia] IIB T4 Ga -20°C < Tamb < +60°C Ex ia ma [ia] IIB T4 Ga -20°C < Tamb < +60°C |
To view the software version on your DuraTacker, go to the DEVICES TAB once you have connected to the unit. Find your DuraTracker serial number in the list and go across to SOFTWARE VERSION to find your current version number.
The latest software version can be found here.
After updating the software, the DuraTracker unit should be reset. Once the DuraTracker has done a full reboot after the reset, it can be re-programmed.
To find your version number, in Flowlink go to HELP and then select ABOUT FLOWLINK. Version number will appear.
The latest software version can be found here. The Flowlink serial number is needed to complete the download.