Home > Flow Meters > Liquid Ultrasonic Flowmeters > Permanent Clamp On Flowmeters > PanaFlow LC Clamp-on Liquid Flow Meter (XMT1000)

PanaFlow LC Clamp-on Liquid Flow Meter (XMT1000)

Suitable for hazardous area environment Either an explosion proof or flameproof design for vital process environments
Suitable for most pipe sizes and materials
Newest Generation of Ultrasonic Clamp-on from Panametrics

Product Options

Quantity Required Date Notes about your application

Case Studies

How Clamp-on Flow Measurement Solutions were used for Hazardous Areas & ATEX Zones

Optimising pump output performance with high accuracy flow-data using PanaFlow LC XMT1000.

Overview

The PanaFlow LC is the newest generation of Ultrasonic Clamp on Flow Meter, which is based on it's predecessor the XMT868, but features many advantages. The PanaFlow LC has a wide range of transducers available which make it suitable for many applications, even in hazardous environments. The PanaFlow LC is Hazardous area certified with either an explosion proof or flame proof design.

Other advantages of the PanaFlow LC include: improved accuracy and repeatability, HART and Foundation Fieldbus digital protocols, Wider flow range for handle more diverse flow measurements.

The Flow Meter is suitable for most pipe sizes and materials, both lined and unlined.

Manufactured by: Panametrics
Model: PanaFlow LC Clamp-on Liquid Flow Meter (XMT1000)

Services offered for this product

Applications

-Suitable for hazardous area environment with either an explosion proof or flameproof design for vital process environments.
-Designed for most refinery or chemical liquids including hydrocarbon liquids, crude oil, lubricating oils, refined hydrocarbons oils, solvents, chemicals, water, sea water, and more.
-Suitable for most pipe sizes and materials, both lined or unlined

Operation and performance
Fluid types	Liquids: acoustically conductive fluids, including most clean liquids, and many liquids with small amounts of entrained solids or gas bubbles
Flow Measurement	Patented Correlation Transit-Time™ model
Pipe Sizes	0.75 in to 300 in (20 mm to 7.5 m)
Pipe Wall Thickness	Up to 4 in (100 mm); consult factory for other wall thicknesses
Pipe Material	All metals and most plastics. Consult RS Hydro for concrete, composite materials, and highly corroded or lined pipes.
Accuracy	±1% of reading: >=2 in/50 mm, >1 ft/s (0.3 m/s) ±2% of reading: <2 in/50 mm, >1 ft/s (0.3 m/s) ±0.5% in field calibration possible Installation assumes a fully developed, symmetrical flow profile (typically 10 diameters upstream and 5 diameters downstream of straight pipe run). Final installation accuracy is a function of multiple factors including pipe centricity, installation accuracy, and others.
Repeatability	±0.2% of reading typical
Range (Bidirectional)	0.1 to 65.6 ft/s (0.03 to 20 m/s)
Measurement Cycle	3 Hz typical (Adjustable to 10 Hz)
Measurement Parameters	Velocity, Volumetric, Mass, Energy, Total Flow
Channels	1, 2, or 3 channels
Optional PC Software	Vitality™ PC Software
XMT1000 Flow Transmitter
Enclosure	Epoxy-coated aluminum or stainless steel NEMX 4X / IP66 & IP67 rating
Specifications	Weight: 10 lb. (4.5 kg Size (D x H x W): 8.40 in. x 6.42 in. x 5.87 in. (213.4 mm x 163.1 mm x 149.1 mm) Mounting: 2 in. pipe or wall mount
Hazardous Area Rating	US/CAN: Class I, Division 1, Groups B, C, D; Class I, Zone 1, Ex d IIC T6; Class I, Division 2, Groups A, B, C, D; Class I, Zone 2, Ex nA IIC ATEX/IECEx: Ex d IIC T6 FISCO outputs Ta = -40° C to +60° C, Type 4X
Temperature Range	Operating: -40°F to 149°F (-40°C to +65°C)* Storage: –67°F to 167°F (–55°C to 75°C) *Maximum ambient temperature is 60°C (140°F) when foundation fieldbus option selected.
Display	128 x 64 mono-color LCD display, configurable for single or dual measurement parameters.
Keypad	Built-in magnetic, six-button, lockable keypad
Standard Inputs/Outputs	One 4 to 20 mA isolated output, 600 Ohm maximum load One additional output may be configured as either a pulse or frequency output.
Digital Communication	Standard: RS485/Modbus Optional: HART® 7.0 protocol, with 4 dynamic variables, includes one additional 4 to 20 mA analog output Optional: Foundation Fieldbus® FISCO, LAS capable with 5 AI blocks and a PID block.
Power Supplies	Universal 100-240 VAC 50/60 Hz ±10% or 12 to 28 VDC
Power Consumption	15W maximum, Typically <7W Inrush current: 25 A maximum @ 100 µs 15 A maximum @ 1 ms

PanaFlow LC Clamp-on Liquid Flow Meter (XMT1000)

Case Studies

Overview

Services offered for this product

Applications

Specification