PanaFlow Z3 Panametrics Inline Ultrasonic Flow Meter

  • Fast and Easy Installation The assembly work is done at the factory. The necessary components are already installed, so all the user needs to do is to bolt the end flanges into place.
  • Bi-Directional Measurement No additional meters required
  • No Moving Parts No loss of process control, no downtime, no expense from calibration, and optimization of assets.
Product Options

Overview

The PanaFlow Z3 is a three-path, wetted ultrasonic flow meter that brings together all of the advantages of ultrasonic technology at a very affordable value. Unlike other flow measurement technologies, the PanaFlow Z3 does not require maintenance since it does not have any obstruction in the flow path that could clog the process line or moving parts to be damaged by the flowing fluid.

Also, due to the inherent nature of ultrasonic flow measurement, the PanaFlow Z3’s measurement is not affected by changing process conditions (temperature, pressure, and conductivity) and does not drift over time, which eliminates the requirement for periodic calibration. Without requirements for maintenance and calibration, the PanaFlow Z3 offers high performance with a low cost of ownership.

Manufactured by: Panametrics
Model: PanaFlow Z3 Panametrics Inline Ultrasonic Flow Meter

Services offered for this product

  • Sales
  • Rental
  • Installation
  • Calibration
  • Maintenance
  • IoT Cloud Compatible

Applications

Chemical
Petrochemical
Refining
Power generation
District energy/HVAC
Water/wastewater
Process control and monitoring
Allocation measurement
Batching and blending
Transfer lines
Cooling water lines
Pipeline metering
Loading/unloading
Plant utilities
Tank farms
Irrigation
Crude refined products

Specification

Operation and performance
Fluid types Liquids: acoustically conductive fluids, including most clean liquids, and many liquids with small amounts of entrained solids or gas bubbles.
Flow measurement Correlation transit time model
Accuracy 3 to 24 in (80 to 600 mm)
  • ±0.25% of reading for velocities above 1.6 ft/s (0.5 m/s)
  • ±1.25 mm/s for velocities below 1.6 ft/s (0.5 m/s)

2 in (50 mm)

  • ±0.5% of reading for velocities above 1.6 ft/s (0.5 m/s)
  • ±2.5 mm/s for velocities below 1.6 ft/s (0.5 m/s)

Accuracy statement assumes measurement of a single phase homogenous liquid with a fully developed symmetrical flow profile passing through the meter (typically 10 diameters upstream and 5 diameters downstream of straight pipe run).

Applications with piping arrangements that create an asymmetrical flow profile may require extended piping straight runs and/or flow conditioning for the meter to perform to this specification.

Calibration

All meters are water calibrated at ambient conditions and include a calibration certificate.

  • 3 points as found 2, 5, and 10 ft/s (0.6, 1.5 and 3 m/s) and 2 points as left 3 and 7 ft/s (0.9 and 2.1 m/s)
Repeatability
  • ±0.15% of reading 3 to 24 in (80 to 600 mm)
  • ±0.2% of reading 2 in (50 mm)
Range (bidirectional) -82 to 82 ft/s (-25 to 25 m/s)
Meter body/transducer system
Meter body materials
  • Low temperature carbon steel: ASTM SA352 Gr. LCC
  • Stainless steel: ASTM SA351 Gr. CF8M
  • Duplex stainless steel: ASTM SA995 GR. CD3MWCuN
Transducer system and material
  • LX transducers with inserts
  • 316 SS or A479 UNS S32760 (Duplex)
  • Wetted components Seals
  • FKM or EPDM
Process fluid temperature range
  • Local mount: -40°F to 302°F (-40°C to 150°C*)
  • Remote mount: -40°F to 302°F (-40°C to 150°C)
*Maximum process temperature is 203°F (95°C) when additional analog input/output options are selected
Pressure range Up to maximum allowable flange operating pressure at temperature per ASME B16.5 or EN1092-1
Piping design
  • ASME B31.3
  • NACE MR0103/MR0175
  • PED PER B31.3, CAT II, A2
  • CRN
Transmitter
Enclosures Powder coated aluminum (copper free) or stainless steel (SS316) conformal coated
Classifications

US/CAN: Class I, Division 1, Groups B, C, D;
Class I, Zone 1, Ex db IIB+H2 T6...150C;
IP 66/67 Type 4X
SINGLE SEAL
ATEX/IECEx: Ex db IIB+H2 T6...150C FISCO outputs
Ta = -40°C to +65°C, IP 66/67
Operating: -40°F to 149°F (-40°C to +65°C*)
Storage: -40°F to 158°F (-40°C to 70°C)

*Maximum ambient temperature is 60°C (140°F when foundation fieldbus option selected)

Transmitter mounting Local or remote mounting
Paths
  • Three paths : 3 to 24 in (80 to 600 mm)
  • Two paths : 2 in (50 mm)
Display

English

128 x 64 mono-color LCD display, configurable for single or dual measurement parameters

Keypad Built-in magnetic, six-button, lockable keypad
Cable entries ¾” NPT
M20 adapters
Power supplies Universal 100-240 VAC 50/60 Hz ±10% or 12 to 28 VDC (15W max, 7W typical)
Standard inputs/outputs
  • One 4 to 20 mA isolated output, 600 Ohm maximum load, NAMUR NE43
  • One additional output, may be configured as either a pulse or frequency output.
Optional inputs/outputs

Analog and digital I/O are available in specific combinations. See ordering information below for details:

  • Two additional 4 to 20 mA isolated outputs, 600 Ohm maximum load, NAMUR NE43
  • One or two 4 to 20 mA isolated inputs, 24-VDC loop power, NAMUR NE43
  • One or two isolated, three-wire RTD (temperature) inputs, –148°F to 662°F (–100°C to 350°C), 100 Ohm or 1000 Ohm platinum
  • One or two isolated, four-wire RTD (temperature) inputs, –148°F to 662°F (–100°C to 350°C), 100 Ohm or 1000 Ohm platinum

Digital interfaces
  • Standard: RS485/Modbus®
  • Optional: HART® 7.0 protocol, with four dynamic variables, includes one additional 4 to 20 mA analog output NAMUR NE43
  • Optional: Foundation Fieldbus® FISCO, LAS capable NAMUR NE107 with five AI blocks and a PID block
Note: Maximum ambient operating temperature range of transmitter with Foundation Fieldbus® is +60°C./td>