Solinst 408M Micro Double Valve Pumps

  • Small and Flexible Design Only 10mm in diameter
  • Range of Tubing Lengths The coaxial PTFE tubing comes in lengths of 90 ft, 140 ft, and 240 ft
  • Easy to Operate Easy to operate using a 464 pump control unit with pre-sets and custom sampling capabilities
  • Perfect for Low Flow Sampling & CMT Multilevel Systems
Product Options
NO-TUBING-LENGTH-SELECTED

Overview

The Micro Double Valve Pump (Micro DVP) is designed to be small and flexible making it ideal for use in narrow boreholes when doing low flow sampling. Instead of using a bladder, the Micro DVP uses coaxial PTFE/FEP tubing making it suitable for CMT or wells with diameters less than 10mm.

The Micro DVP is small enough to fit in 1/2â?? (13mm) tubing and all channels of the Solinst Model 403 CMT Systems. Its unique size and flexibility means it is easy to transport and install in various applications.

Micro DVPâ??s are suitable for low flow sampling and narrow down-hole applications with flow rates ranging between 20 to 150ml/min without producing excessive purge volumes. The Micro DVP is durable and easy to operate using the pre-sets and custom sampling capabilities built into the Solinst Model 464 Electronic Control Unit.

Operation

Formation water enters through the Micro DVPâ??s filter caused by hydrostatic pressure into both the inner PTFE tube and the annulus of the coaxial tubes. Drive gas/air is then cycled down the annular space located between the two tubes to then close the lower check valve and to push the water up the inner sample tube. The pump is then vented so that new formation water can enter both the tubes under hydrostatic pressure. The pressure of gas/air is monitored and controlled at all times to ensure that the air/water interface is never able to enter the pumps body. The pressure/vent cycle in then repeated to bring a high quality sample to the surface in a regulated manner.

The Micro Double Valve Pump was designed to operate with 2ft (0.6m) head of water or more over the intake.

Manufactured by: Solinst
Model: Solinst 408M Micro Double Valve Pumps

Services offered for this product

  • Sales
  • Rental
  • Installation
  • Calibration
  • Maintenance
  • IoT Cloud Compatible

Applications

CMT and Waterloo multi-level systems
Direct-push/drive points
Low flow monitoring in narrow diameters

Specification

Diameter 3/8” (10 mm)
Material Coaxial PTFE/FEP tubing stainless steel fittings and a sintered 316 stainless steel 50 micron filter.
Pump Body and Filter Assembly Dimensions 6” x 3/8” (150 mm x 10 mm).
Pump Manifold
Diameter 3/16” (5 mm)
Material PTFE sample tube and a quick-connect fitting for easy attachment to a control unit.

Related products