The Solinst 12V Submersible Pump provides an efficient means of purging and obtaining groundwater samples from monitoring wells.
The 12V Submersible Pump and 12V Pump Controller are lightweight, portable, and easy to set up, deploy and operate. The Pump’s sleek, short design ensures it fits easily down wells without hang-ups.
The Solinst 12V Submersible Pump is capable of pumping groundwater from 36.5 m (120 ft) below ground surface, with flow rates up to 13.5 L/min (3.6 US gpm) in shallow conditions.
Manufactured by: Solinst
Model: Solinst 415 12V Submersible Pump
- High and low-flow groundwater sampling for general chemistry
- High purge rates ideal when sampling using three volume purge protocol
- Useful when performing constant head tests in environments with high K (hydraulic conductivity)
Sampling Depth | As much as 36.5 m (120 ft) below ground surface |
Flow Rates | Up to 13.5 L/min (3.6 US gpm) |
Pump Cable Length | 40 m (130 ft) |
Pump Cable Weight | 3.5 kg ( 7.8 lbs) |
Wetted Materials | ABS pump body, 304 stainless steel motor, impeller and eyebolt, poly- propylene hose barb, nitrile/buna o-rings and seals, PVC jacket electrical wire |
Pump Size | 4.78 cm OD x 13.97 cm long (1.88" x 5.5") |
Pump Weight | 0.8 kg (1.8 lbs) |
Controller Size | 33 cm x 13 cm x 17 cm (13" x 5" x 6.5") |
Controller Weight | 3.4 kg (7.5 lbs) |
Controller Cable Length | 1 m (3.5 ft) |
Power Source | 12V Deep Cycle 60 amp AGM Battery or larger, or vehicle or marine battery. |
Voltage Required | 12.5V–15V at source |
Power Draw | 20mA (when dial is OFF), 3A (dial is at 1) to 36A (dial is at MAX (10) |
Max. Run Time | Continuous, as long as Pump fully submerged during operation |
Warranty | 12V Submersible Pump: 90 Days 12V Pump Controller: 3 Years |