601 Standpipe Piezometers
- Range of Standard Lengths 15 cm, 30 cm, 60 cm and 90 cm (6 inch, 1 ft, 2 ft and 3ft)
- Reliable
- Low Cost
- Ideal for metal sampling
Overview
The Standpipe Piezometer is composed of a Vyon tube set inside a perforated PVC piezometer tip which is ideal for metal sampling. As well as this, the 601 is suitable for water level monitoring, permeability measurements, air sparging, construction control, de-watering drainage operations and slope stability investigations, etc.
The 601 tip connects to the surface with 3/4â?? ID PVC riser pipe using slip-fit couplings. Reducer couplings can also be used to connect to other sizes of riser pipe or casing. The standard 601 tip lengths available are 15cm, 30cm, 60cm and 90cm (6â??, 1ft, 2ft, and 3ft).
For those applications that need a Piezometer to be pushed into the soil below the bottom of a borehole, Solinst now offers the Model 615 stainless steel Drive-Point Piezometer. This can also be driven directly into the ground from the surface.
Manufactured by: Solinst
Model: 601 Standpipe Piezometers
Services offered for this product
- Sales
- Rental
- Installation
- Calibration
- Maintenance
- IoT Cloud Compatible
Applications
Water level monitoring
Permeability measurements
Construction control
Slope stability investigations
Air sparging: a 1ft. Piezometer has 18 x 3/8" diameter holes i.e 2 sq inches/ft
Metals sampling
Specification
| Filter | - Porous HDPE (Vyon) - Average pore size 60 microns - Keeps out silts and fine sands |
| Standard Lengths Available | 15 cm, 30 cm, 60cm and 90 cm (6", 1 ft, 2 ft and 3 ft) |
Related products
FAQ's
660 Drive-Point Profilers - Drill rig hammers
615 Drive-Point Piezometers – Direct push/drilling methods
601 Standpipe Piezometers – Placed in a borehole or test pit
660 Drive-Point Profilers – Typically the limit is 9m below the water surface.
615 Drive-Point Piezometers – Typically 2-3m in loose deposits.
601 Standpipe Piezometers – Can go as deep as required.
615 Drive-Point Piezometers – Screened tips available in 6” and 1ft lengths. Can have a compression fitting, hose barb, or no barb as well as shielded options.
601 Standpipe Piezometers – Screened tips are available in 6”, 1ft, 2ft, and 3ft. These use a Vyon® filter.
For monitoring water levels:
- 102 Water Level Meters with 10mm Probe
- A 1” to ¾” stainless steel reducer coupling to install a Levelogger in a 1” drive extension section.
Sampling options include:
- 410 Peristatic pump
- 403 Mini inertial pump
- Narrow diameter 429 Point-Source Bailer