The DewPro MMY31 measures dew point or ppmv in gases. It is a cost-effective, loop-powered dew point transmitter designed for “in-line” installation where trace moisture measurement is required. The planar aluminum oxide sensor provides excellent corrosion resistance, longer calibration stability, quick response times, and an exceptionally low temperature coefficient.
The DewPro MMY31 mounts directly in-line in your process gas, where a bypass installation is not appropriate. It is easily installed via a variety of adjustable insertion length compression fittings. The optional integrated display with user interface provides full programming and diagnostic capability.
Manufactured by: Panametrics
Model: DewPro MMY31 Dew Point Transmitter
Environmental chambers
Test chambers
Gloves boxes
Overall | |
Sensing element | Planar aluminum oxide sensor |
Measurement range | -130°F to 50°F (-90°C to 10°C) dew point temperature; 0 to 10 ppmv, 0 to 1000 ppmv (fully adjustable with integral display) |
Recommended recalibration cycle | 12 months, depending on the application |
Calibration accuracy | ±3.6°F (±2°C) dew point at 77°F (25°C) |
Maximum sensor relative humidity | 50% at dew point temperatures >32°F (>0°C) |
Operating temperature range | Process: -40°F to 122°F (-40°C to 50°C) Electronics: -40°F to 185°F (-40°C to 85°C) |
Element filter | 100 micron, sintered stainless steel |
Standard operating pressure | 0 to 1750 psig (0 to 120 bar, 12 MPa) |
Helium leak-rate | <10-6 mbar/s |
Output | 4 to 20 mA loop-powered, 16 μA resolution |
Electronics | Microcontroller operated |
Optional display | Four-digit numeric display with bar graph and matrix position indication; four user interface keys for unit selections, output adjustments and ranging |
Power supply | 24 VDC nominal, 12 to 30 VDC |
Protection | Type 4X/IP67 |
Weight | 3.3 lb (1.5 kg) |
Probe tube | 316 stainless steel, 1/2 in. (12.7 mm) diameter, insertion length 2 in. (50 mm) to 3.5 in. (90 mm) |
Typical probe mounting | 1/2 in NPT-M, 3/4 in NPT-M, 3/4-16 O-ring, G 1/2 compression fittings. Others available, consult factory. |
European compliance | Complies with EMC Directive 89/336/EEC and PED 97/23/EC for DN<25 |
Optional certifications/approvals |
|