The XDP explosion-proof display provides the measurement of percent or ppm oxygen or hydrogen gas. The explosion-proof XDP is certified for use in Class 1, Division 1, Groups B, C and D as well as Zone 1 ATEX/IECEX Ex d IIC T6 Gb hazardous areas. The XDP features advanced microprocessor-based electronics, a magnetic, through-the-glass keypad, a universal power supply (magnetic), one 0/4 to 20 mA or 0 to 2 VDC analog output, four process alarms, and a fault alarm.
Manufactured by: Panametrics
Model: XDP Panametrics Explosion-proof Display
Functional | |
Analog output | Linearized isolated 4 to 20 mA, 0 to 20 mA or NAMUR userselectable, field-programmable output for any range from 0 to 100 percent or 0 to 10,000 ppm. |
Input power | 85 to 264 VAC, 47 to 63 Hz, 40 W 24 VDC(±0.2V), 40W |
Fuse | 1.25 A (AC units) 2.0 A (DC units) |
Analog input | 4 to 20 mA |
Output power supply | 24 VDC ±2 VDC at 1.2 Amp |
Ambient temperature range | 14°F to 140°F (–10°C to 60°C) |
Keypad | Magnetic, through the glass, six keys |
Display | Four-line, backlit liquid crystal display |
Display accuracy | ±0.25% of full scale |
Relay outputs |
|
Standard software for O2/gas analysis | |
Measurement Range Examples |
|
Relays |
|
Hydrogen-cooled generators | |
Three ranges |
|
Relays |
|
Physical | |
Dimensions (w x h x d) | 9 in x 10 in x 9 in. (229 mm x 254 mm x 229 mm) |
Weight | 15 lb (6.8 kg) |
Environmental |
|
European compliance | Complies with EMC directive 2014/30/EU and low voltage directive 2014/35/EU |
Conduit/cable gland entry | Six 1/2 in NPTF conduit ports |
Mounting holes | Four 3/8 in (10 mm) holes |