The mantaMobile wireless Bluetooth device provides a convenient, low cost way to access data from Eureka multiprobes.
The mantaMobile device connects to the multiprobe using the underwater cable. A mobile device is then connected to the mantaMobile via Bluetooth allowing data to be viewed.
Compatible with the whole Eureka multiprobe range - Manta+, Trimeter and EasyProbe
Manufactured by: Eureka
Model: Eureka mantaMobile Bluetooth Device
Spot checking
Profiling
Low flow sampling
Lab use
Wireless communication to cable reels
Operating Temperature | -5 to 50°C (23 to 122°F) |
Storage Temperature | -20 to 50°C (-4 to 122°F) |
Dimensions | 3 X 2 X 5 inches (7.62 X 5.08 X 12.7 cm) |
Weight | 1.2 lb |
Materials | PVC, Stainless Steel |
Communications Protocol | BLE 4.2, 10 meter range indoors |
Default Communication Settings | Baud: 19200; Data bits: 8; Parity bits: None; Stop bits: 1 |
Battery Type | Lithium rechargeable, 4.4 A-Hr, 11.1 Volt |
Battery Life | Fully charged will run up to 22 continuous hours with 13 sensors. Run time increases with fewer sensors; will vary depending on the type and number of sensors installed. |
Charging Requirements | 12 V, 2 A, charger included |
Warranty | 3 years |