The TN100 Turbidimeter from Eutech Instruments is the ideal meter for on the go turbidity measurement. It comes complete with a handy carrying case, calibration kit with 4 calibration standards and 3 sample vials.
This waterproof IP67 rated meter uses an infra-red light source to provide laboratory accuracy with a resolution of 0.01 NTU across an extended range of up to 20 NTU. Calibration is easy with the 4-point push-button calibration. Readings are easily viewed on the large display with user-friendly message codes making troubleshooting easy.
From a single set of AAA alkaline batteries, the power saving feature of the TN 100 allows over 1200 measurements to be taken.
The TN100 is covered by a two year meter warranty.
                                                Manufactured by: Eutech Instruments 
                                                Model: Eutech TN100 Turbidimeter
                                            
                    Environmental
Drinking water
Beverage production
Aquaculture
Aquariums
Swimming pools                        
| Principle of Operation | Nephelometric non-ratio (conformance to ISO 7027 and DIN EN 27027) | 
| Turbidity Range | 0 to 1000 NTU | 
| Resolution | 0.01 NTU (0 to 19.9 NTU) 0.1 NTU (20.0 to 99.9 NTU) 1 NTU (100 to 1000 NTU) | 
| Accuracy | ± 2% of reading ± 1 LSD for 0 to 500 NTU ± 3% of reading ± 1 LSD for 501 to1000 NTU | 
| Repeatability | ± 1% of reading or ± 0.01 NTU | 
| No. of Calibration Points | 4 points (automatic) | 
| Response Time | < 6 seconds for full step change | 
| Calibration Standards | 0.02 NTU; 20.0 NTU; 100 NTU; 800 NTU | 
| Standardization | EPA-approved polymer-based primary standards | 
| Light Source Life | > 1,000,000 tests | 
| Light Source | Infrared-emitting diode (850nm wavelength) | 
| Special Functions | Auto-Ranging; Self-diagnostic | 
| Power Requirements | 4 x 1.4V batteries, > 200 hours |