The TLC Meter is designed to profile conductivity and temperature in wells and open water. It displays accurate measurements on a convenient LCD screen that rotates for ease of reading.
The TLC Meters conductivity measurements are read from 0-80,000 µS/cm with readings giving accuracy of 5% of reading or 100 µS. The TLC Meter uses a â??smartâ?? conductivity sensor with platinum electrodes to measure conductivity. It displays conductivity that has been standardized to 25°C. This sensor can be calibrated using 1413 µS, 5000 µS, 12,880 µS, and/or 80,000 µS for 1, 2, 3 or 4 point manual conductivity calibrations.
The TLC Meter features a durable PVDF flat type that has been accurately laser marked every 1/100ft and every millimetre and is available in lengths of up to 1000ft (300m).
Once the zero point of the probe comes into contact with the water, a light and buzzer will be triggered. The depth of the water and depth of displayed readings are read off the tape. The 9V battery is stored in an easy access compartment on the reel and provides up to 90 hours of use.
Features
Manufactured by: Solinst
Model: Model 107 TLC
Profiling conductivity and temperature in wells and open water
Saltwater intrusion monitoring
Tracer tests
Salinity studies
Testing for water quality impairments from road salt
General indication of chemical contamination level
Early warning of changes in water quality at Industrial sites & Landfills
Temperature Range | -15°C to +50°C (23°F to 122°F) |
Temperature Accuracy | 0.2°C (+/- 0.4°F) |
Conductivity Range | 0-80,000 µS |
Conductivity Accuracy | 5% FS or 100µS/cm, whichever is greater | LM2 | Each 1/100 ft. and 1/10 ft. and ft. |
LM3 | Each mm, cm and m |
Length | 100ft, 200ft, 300ft, 500ft, 750ft, 1000ft (30m, 60m, 100m, 150m, 250m, 300m) |