Home > Moisture Probes & Gas Analyzers > Aluminium Oxide Moisture Probes > HygroPro ll Aluminium Oxide Moisture Transmitter

HygroPro ll Aluminium Oxide Moisture Transmitter

New

Close up image of the HygroPro II moisure transmitter display

Moisture Detection from Trace to Ambient Levels: Moisture detection in gases and hydrocarbon liquids
Built-in Temperature Sensor: Provides temperature compensation
Optional Pressure Sensor
Intrinsically Safe
NIST Traceable Calibration

The cart is updated.

Overview

Specifications

The HygroPro^II from Panametrics, is a loop-powered, intrinsically safe moisture transmitter capable of trace or ambient moisture detection in gases and hydrocarbon liquids. It has been specifically designed to meet the high demands of rugged industrial and hydrocarbon processing applications.

The HygroPro^II combines robust electronics with the latest state-of-the-art aluminium oxide sensor, the FX sensor, to provide unequalled overall performance.

Up to three parameters can be viewed simultaneously on integrated backlit display. The display combined with the six-button keypad allow easy navigation of the software for configuration and diagnostics.

You can learn more about the HygroPro II in this video.

Manufactured by: Panametrics

Model: HygroPro ll Aluminium Oxide Moisture Transmitter

Services offered for this product

Sales
Rental
Installation
Calibration
Maintenance

Applications

Natural gas
Industrial gas
Petrochemical
Power generation
Furnace gas/heat treating
Semiconductor
Air dryer
Pharmaceutical
Aerospace

Calibration ranges (dew/frost point)
Standard	50 to -112°F (+10 to –80°C) with data from +68 to -166°F (+20 to -110°C)
Operating temperature	-4°F to 140°F (–20°C to 60°C)
Storage temperature	-40°F to 158°F (-40°C to 70°C)
Accuracy	±3.6°F (±2°C) above -148°F (-100°C) ±5.4°F (±3°C) below -148°F (-100°C)
Repeatability	±0.4°F (±0.2°C) above -148°F (-100°C) ±0.9°F (±0.5°C) below -148°F (-100°C)
Electrical
Power	Voltage: 12 to 28 VDC (loop-powered, customer supplied) Output: 4 to 20 mA analog & HART digital Output Resolution: 0.01 mA/12 bits Cable: 6 ft. (2 m) and 30 ft. (10 m) options standard (consult factory for custom lengths); cable includes molded weatherproof connector with flying leads
Display	128 x 64 LED backlit LCD Display from one to three parameters and diagnostics
Mechanical
Sample connection	3/4-16 in. (19 mm) straight male thread with O-ring G 1/2 with optional adapter
Operating pressure	5 μm Hg to 5000 psig (345 bar)
Enclosure	Type 4X, IP 66 and IP 67
Dimensions	H x W x D: 7.88 x 3.99 x 2.56 in. (200 x 101 x 65 mm) Weight: 2.53 lbs. (1147 g)
European compliance	Complies with EMC directive 2014/30/EU
Hazardous area certification	US/Canada: Class I, Division 1, Groups A, B, C and D; T4 Class II, III Division 1, Groups E, F and G; T4 (US Only) Class I, Zone 0, AEx ia IIC T4 Ga US/Canada: Class I, Division 2, Groups A, B, C and D; T4 Class II, III Division 2, Groups F and G; T4 Class I, Zone 2, AEx ic IIC T4 Gc (US Only) ATEX/IECEx: Ex ia IIC T4 Ga; Ex ic IIC T4 Gc Ambient temperature range -20°C ≤ Ta ≤ +60°C Single Seal Certified per ANSI/UL 122701
Moisture sensor
Sensor type	Thin-film aluminum oxide moisture sensor
Calibration	Each sensor is individually computer-calibrated against known moisture concentrations, traceable to national standards
Calibration interval	Panametrics recommends moisture sensor recalibration every six to twelve months depending on application
Temperature sensor
Sensor type	NTC thermistor
Operating range	-22°F to 158°F (–30°C to 70°C)
Accuracy	±0.9°F (±0.5°C) overall
Pressure sensor
Sensor type	Solid state/piezoresistive
Available ranges	30 to 300 psig (3 to 21 bar) 50 to 500 psig (4 to 35 bar) 100 to 1000 psig (7 to 69 bar) 300 to 3000 psig (21 to 207 bar) 500 to 5000 psig (35 to 345 bar)
Accuracy	±1% of full scale (FS)
Pressure rating	Three times the span of the specified range to a maximum of 7500 psig (518 bar)

Quantitiy

Required Date

Notes about your application