The AquaTrans AT600 clamp-on ultrasonic transmitter provides flow measurement in a low-cost package which can be installed at the measurement point. It has been designed specifically for use in full bore pipes in water and wastewater applications but is not limited to use in just these applications. The AT600 benefits from no moving parts, therefore, minimal maintenance is required. Patented Correlation Transit-Time™ technology is used to achieve long-term, drift free operation.
Clamp-on transducers offer maximum convenience, flexibility and a low installation cost compared to traditional
flow metering technologies. Manufactured by: Panametrics Model: AT600 Clamp On Liquid Flow Meter
Services offered for this product
- Sales
- Rental
- Installation
- Calibration
- Maintenance
Applications
- Potable water
- Sewage
- Wastewater
- Treated water
- Discharge water
- Cooling and heating water
- Irrigation water
- Other industrial fluids
Fluid Types |
Liquids: acoustically conductive fluids, including most clean liquids, and many liquids with small amounts of entrained solids or gas bubbles |
Flow Measurement |
Patented Correlation Transit-TimeTM mode |
Pipe Sizes |
15 mm to 7600 mm (1/2 inch to 300 inch) |
Pipe Materials |
All metals and most plastics. Consult RS Hydro for concrete, composite materials, and highly corroded or lined pipes. |
Accuracy |
±1% of reading in application, ≥2 in. (50 mm) pipe and >1 ft/s (0.3 m/s) velocity ±2% of reading in application, <2 in. (50 mm) pipe and >1 ft/s (0.3 m/s) velocity
±0.5% in field calibration
Installation assumes a fully developed, symmetrical flow profile (typically 10 diameters upstream and 5 diameters downstream of straight pipe run). Final installation accuracy is a function of multiple factors including fluid, temperature range, pipe centricity and others. |
Calibration |
All meters are water calibrated and delivered with a traceable calibration certificate. |
Repeatability |
±0.2% of reading
|
Range (Bidirectional) |
-40 to 40 ft/s (-12.19 to 12.19 m/s) |
Rangability (Overall) |
400:1 |
Measurement Parameters |
Velocity, Volumetric, and Totalized Flow |
Electronics |
Enclosure |
Epoxy-coated aluminum weatherproof Type
4X/IP67 |
Dimensions |
6.6 x 5.0 x 2.4in (168 x 128 x 61mm)
Weight: 3.5 lbs/1.5kg |
Channels |
One channel |
Display |
Graphic LCD (128 x 64 pixels) |
Keypad |
Six-button keypad, for full functionality operation |
Error Display Indicator |
Green or red light |
Power Supplies |
Standard: 85 to 265 VAC, 50/60 Hz
Optional: 12 to 28 VDC, ± 5%
|
Power Consumption |
10 Watts in rush
5 Watts normal operation |
Operating Temperature |
-4°F to 131°F (-20°C to 55°C) |
Storage Temperature |
-40°F to 158°F (-40°C to 70°C) |
Outputs (Based on Configuration) |
- 4-20mA (24VDC powered, 600Ω maximum load, 1500 VDC Isolation)
- Frequency, Pulse, Alarm (Passive output, 100VDC, 1A/1W maximum, 1500 VDC isolation)
- HART (FSK modulation, Category Flow, Protocol Version 7.5, Device Revision 2, MFG ID 157, Device Type Code 127, Number of device variables 34)
- Modbus/RS485 (Half-duplex, 1500 VDC Isolation)
Note: Analog outputs are Namur NE43 compliant |
Certification |
CE, UL, CSA, (MCert approval pending) |
Clamp-On Ultrasonic Flow Transducers |
Temperature Ranges |
Standard: -40°F to 302°F (-40°C to 150°C)
Optional: -328°F to 752°F (-200°C to 400°C)
See specific transducer for exact temperature range. |
Mounting Fixture |
Anodized aluminum with stainless steel strapping |
Couplant |
Standard: Solid couplant
Optional: Liquid couplant |
Rating |
Standard: General purpose (IP66 or IP68)
Note: See specific transducer model for exact rating. |
Warehouse conversion to smaller business units water sub-metering project Panametrics Ultrasonic Flowmeter used to Replace Damaged Electromagnetic Flowmeter AT600 Installation and Commissioning: Unleashing the Power of Ultrasonic Flow Measurement Case Study - Maximising Efficiency: Clamp-on Flowmeters Vs. In-line Systems in Advanced Flow Measurement Expert Systems Maintenance: Calibration and Verification Services for Optimal Performance How to choose the right monitoring options for outdoor pipe flow
Wildeye IoT LoggerThe Wildeye is a revolutionary device that connects meters & sensors directly to your phone - out of the box. View product page Panametrics AT868 Clamp On Flowmeter The AT868 clamp on ultrasonic flow meter combines state of the art ultrasonic flow measurement capability with a low-cost transmitter package that can be installed right at the process measurement point. It's designed specifically for water and wastewater applications in full pipes. View product page Panametrics DF868 Liquid Flowmeter The DF868 MCERTS-registered clamp on flow meter uses the Transit-Time for measuring most liquids. Single Channel or Dual Channel. Suitable for hazardous areas. IN STOCK. View product page PT900 Portable Ultrasonic Flow MeterThe PT900 is the latest generation of portable clamp on flow meters from Panametrics. View product page DM5E Corrosion Thickness GaugeNeed to measure pipe wall thickness in the field, don't want to remove the coating at the measuring point - look no further than The DM5E by Waygate Technologies, in stock from RS Hydro. View product page
|
|