The AquaVent 5 records accurate water level and temperature
measurements in shallow groundwater and surface water
applications. It combines pressure and temperature sensors,
hydrophobic filters and datalogger within a 22 mm x 173 mm
(7/8" x 6.8") stainless steel housing with corrosion-resistant
coating.
The Model 3500 AquaVent 5 uses a gauged pressure transducer; it is open
to the atmosphere via a vented cable to surface. Atmospheric
pressure is applied to the transducer diaphragm, providing a
cancellation effect for barometric pressure. This results in actual
water level recordings.
The vented cable and Solinst AquaVent 5 logger are protected
from moisture by built-in desiccants and hydrophobic filters.
The vented pressure transducer is made of Hastelloy®, making it
extremely durable and accurate in a wide range of temperature
and monitoring conditions. The sensor provides an accuracy
of 0.05% FS, and can withstand 2 times over-pressure without
permanent damage.
The robust memory can hold up to 150,000 data sets when
programmed in Solinst Levelogger® Software. Manufactured by: Solinst Model: AquaVent 5 Water Level Logger
Services offered for this product
- Sales
- Rental
- Installation
- Calibration
- Maintenance
Applications
- Ideal for shallow applications: up to 20 m (65 ft) submergence
- Aquifer characterisation: pumping tests, slug tests, etc.
- Stream gauging, lake and reservoir management
- Watershed, drainage basin and recharge monitoring
- Storm water and runoff monitoring
- Long-term water level monitoring in wells and surface water
AquaVent 5 Specifications |
Level Sensor: |
Piezoresistive Silicon with Hastelloy Sensor |
Accuracy: |
± 0.05% FS Typical |
Stability of Readings: |
Superior, low noise |
Units of Measure: |
m, cm, ft., psi, kPa, bar, ºC, ºF |
Resolution: |
0.001% FS to 0.0006% FS |
Normalization: |
Automatic Temperature Compensation |
Temp. Comp. Range: |
0º to 50ºC |
Temperature Sensor: |
Platinum Resistance Temperature Detector (RTD) |
Operating Temperature: |
-20ºC to 80ºC |
Temp. Sensor Accuracy: |
± 0.05ºC |
Temp. Sensor Resolution: |
0.003°C |
Battery Life: |
8 Years — based on 1 reading/minute |
Clock Accuracy (typical): |
± 1 minute/year (-20ºC to 80ºC) |
Maximum # Readings: |
150,000 sets of readings |
Memory: |
Slate and Continuous |
Communication: |
57,600 bps Solinst USB, 1200 baud SDI-12, Modbus RS-485/RS-232 (various speeds) |
Size: |
22 mm x 173 mm (7/8" x 6.8") |
Weight: |
190 grams (6.7 oz.) |
Corrosion Resistance: |
Baked-on coating using polymerization technology (inside and out) |
Wetted Materials: |
Delrin®, Viton®, 316L stainless steel, Hastelloy, PFAS-free PTFE coating |
Sampling Modes: |
Linear, User-Selectable with Repeat Mode, Event, Future Start, Future Stop, Real-Time View |
Measurement Rates: |
1/8 sec to 99 hrs |
Barometric Compensation: |
Automatic |
Solinst Levelogger 5 App and App Interface RS Hydro are proud to be UK and Ireland distributors for the NEW Solinst Levelogger 5 App and App Interface. Using dataloggers in the field will never be the same again once you use this new technology. View product page
Solinst Model 3001 DataGrabber 5 The 3001 DataGrabber 5, from Solinst, provides a low cost, portable solution for Levelogger users to download data directly to a USB flash drive key. View product page
Solinst 4G LevelSender 5 with SIM Card Capability and Barometer The LevelSender 5 is a simple, low cost system designed to wirelessly send data from Solinst dataloggers in the field, via cellular communication, to multiple emails and an SMS recipient. You can receive data right on your smart device. View product page
SRU Solinst Readout Unit - Model 4001The Solinst Readout Unit (SRU) is a field-ready device designed to take and display instant water level readings from a deployed Solinst datalogger, as well as allowing simple download of stored data. View product page
3001 BioFoul Screen The 3001 Bio-Foul Screen is the perfect screen for extending the deployment time of Levelogger Edge, Levelogger Junior Edge and the LTC Levelogger Junior, it is espically for coastal and saltwater environments. View product page
Support Hanger Bracket for LevelSender and AquaVentSpare support hanger bracket for the LevelSender, AquaVent and 301 Water Level Temperature Sensor. View product page
Solinst LevelVent 5 Water Level Datalogger The Model 3250 Solinst LevelVent 5 is a vented version of the Levelogger. The high accuracy datalogger is suitable for water level and temperature measurement of surface water and shallow groundwater. View product page Solinst Levelogger 5 The Levelogger 5 combines a pressure and temperature sensor to record highly accurate groundwater and surface water level and temperature measurements. View product page Solinst Levelogger 5 Junior The Levelogger 5 Junior provides a low-cost solution for monitoring surface water and goundwater levels and temperature. It combines a data logger, temperature and pressure sensor in a compact stainless-steel housing to provide an accuracy 0.1% FS. View product page Solinst Levelogger 5 LTCThe Levelogger 5 LTC logs water level, temperature, and conductivity. View product page
|
|