The LTC Levelogger Edge measures conductivity, water level and temperature. It combines a datalogger, pressure sensor, temperature detector and conductivity sensor within a compact Hastelloy, waterproof housing. Measuring 7/8" x 7.5" (22 mm x 190 mm), the LTC Levelogger Edge includes a titanium ceramic PVD coating to protect the sensor from corrosion.
The conductivity sensor is a 4-electrode platinum sensor that is capable of auto-ranging. The LTC Levelogger Edge is practical for field use as the datalogger requires minimal maintenance, is simple to clean and calibrate and has an 8 year battery life. It's memory is non-volatile and can store up to 27,000 readings.
The LTC Levelogger Edge can be installed with direct read cables or cord suspension for easy deployment. It is compatible with the 3001 Levelogger Series including Solinst Telemetry, Bluetooth App Devices and Data Grabber so data can be downloaded in the field.
Manufactured by: Solinst Model: Levelogger LTC Edge Conductivity Data Logger (CTD)
Services offered for this product
- Sales
- Rental
- Installation
- Calibration
- Maintenance
Applications
- Salt water intrusion and soil salination monitoring
- Plume remediation monitoring and studies
- Leachate monitoring at landfills, mine tailings, waste disposal storage sites, and more
- Agricultural and stormwater runoff monitoring
- Tracer tests
| Level Sensor |
Piezoresistive Silicon with Hastelloy Sensor |
| Ranges |
5, 10, 20, 30, 100, and 200 m |
| Accuracy |
±0.05% FS |
| Units of Measure |
cm, m, ft, psi, kPa, bar (ºC, ºF) |
| Normalization |
Automatic Temperature Compensation |
| Temp Compensation Range |
0°C to 50°C |
| Temperature Sensor |
Platinum Resistance Temperature Detector (RTD) |
| Accuracy |
±0.05°C |
| Resolution |
0.003ºC |
| Conductivity Sensor |
4-Electrode Platinum |
| Full Range |
0 to 100,000 µS/cm |
| Calibrated Range |
50 to 80,000 µS/cm |
| Accuracy |
±1% > 30,000 µS/cm; ±2% 500 - 30,000 µS/cm; ±30µS < 500 µS/cm |
| Resolution |
±0.1 µS/cm |
| Temp Compensation Range |
0°C to 50°C |
| Normalization |
Specific Conductance @ 25°C |
| General |
| Battery Life |
8 Years (1 reading every 5 minutes) |
| Clock Accuracy |
°1 minute/year (-20°C to 80°C) |
| Operating Temperature |
-20°C to 80°C |
| Maximum Readings |
27,000 sets of readings in FRAM memory |
| Memory |
Slate or Continuous |
| Communication |
Optical Infra-red: USB, RS-232, SDI-12 |
| Size |
7/8" x 7.5" (22 mm x 190 mm) |
| Weight |
7.05 oz. (200 grams) |
| Corrosion Resistance |
Titanium ceramic PVD coating |
| Wetted Materials |
Hastelloy, 316L Stainless Steel, Delrin®, Viton®, Titanium ceramic PVD coating |
| Sampling Mode |
Linear, Event & User-Selectable with Repeat Mode, Future Start, Future Stop, Real-Time View |
| Measurement Rates |
2 seconds to 99 hours |
| Barometric Compensation |
Software Wizard and Barologger Edge |
 Solinst Barologger Edge Barometric Datalogger The Barologger Edge is the most accurate datalogger for the compensation of Solinst water level dataloggers such as the Levelogger Edge, Junior and LTC. View product page Solinst Levelogger Optical Reader RS Hydro stock the Solinst Levelogger Optical Reader which enables communication with your levelogger. View product page Solinst Levelogger Direct Read Cable RS Hydro supply the Solinst Direct Read Cable to enable real-time data and communication with Leveloggers without the need removal from the water. View product page Solinst LevelSenderThe LevelSender is a low cost device designed to provide wireless telemetry from Solinst loggers in the field, directly to multiple email addresses and an SMS recipient. Ideal for cutting down time needed to go to site as you can receive data direct to your smart device. View product page Solinst Levelogger App and Interface RS Hydro are proud to be UK and Ireland distributors for the NEW Solinst Levelogger App and Levelogger App Interface. Using dataloggers in the field will never be the same again once you use this new technology. View product page Solinst Model 3001 DataGrabber The 3001 DataGrabber, from Solinst, provides a low cost, portable solution for Levelogger users to download data directly to a USB flash drive key. View product page 3001 BioFoul Screen The 3001 Bio-Foul Screen is the perfect screen for extending the deployment time of Levelogger Edge, Levelogger Junior Edge and the LTC Levelogger Junior, it is espically for coastal and saltwater environments. View product page Solinst Levelogger PC Interface Cable The Solinst levelogger PC Interface Cable is for the purpose of transfer of data in the field. View product page Kevlar Cord Solinst Kevlar cord is available in 50ft, 100ft, 200ft, 300ft and 500ft. View product page Stainless Steel Cable RS Hydro stock Stainless Steel Cable for use with level and data logging equipment View product page
|
|
 ){kind=link}